Processing Processing A—D There are four processing blocks in the XAPeach with filters, compressors, and delay to provide pinpoint audio configurations. The Telco Meters window is a diagnostic tool which allows you to observe the performance of various aspects of XAP operation. Rs Menu 26 for more information. Selecting baud rate Click Next.
|Published (Last):||4 January 2013|
|PDF File Size:||8.98 Mb|
|ePub File Size:||12.93 Mb|
|Price:||Free* [*Free Regsitration Required]|
It shall operate in environments with up to 12dB of room gain. Each input shall also be able to reference any output, any of four global reference buses, or any of four summing virtual references for echo cancellation. The unit shall have four internal and four global automatic microphone mixers, each with fully adjustable parameters. The microphone mixer shall use PA adaptive, adaptive ambient, chairman override, first mic priority, last mic mode, number of open mics, and look-ahead gating.
The unit shall have front panel control of gain and mute for inputs, outputs, and processing channels. Any input can be routed to any output or multiple outputs. Signal processing shall be provided by four assignable processing blocks, each supporting 15 programmable filters, delay, and compression.
The processing block filters shall include: high pass, low pass, all pass, low shelving, high shelving, notch, parametric EQ, CD horn, Bessel crossover, Butterworth crossover, and Linkwitz-Riley crossover. Filter setup shall be real-time. The unit shall include a signal generator for pink noise, white noise, and tone sweep capabilities, and shall be assignable to any input on any linked unit. The unit shall have a channel bi-directional audio bus to pass audio, system control, four channels for echo cancellation referencing, and four channels of NOM for four sub-mixers to other units.
The maximum distance between linked units shall be 80 feet 24 meters. Up to eight units can be linked together. Multiple presets can be used simultaneously without interruptions or interference with other presets. The unit shall feature a macro recorder to create up to macros for simple remote control management of the system. System settings shall be saved in the unit, and shall include password protection.
The unit shall be set up and operated with intuitive software that allows complete configuration of the system. Additional control shall be handled via RS protocol with communication speeds up to 57, baud, RS control panels or remote control, or contact closure. It shall have a 48kHz sample rate. The unit shall provide two RJ connectors for connection to a telephone line and telephone set. DTMF dialing capability shall be provided on the hybrid.
Additional settings shall be enabled through configuration software. The unit shall be able to store 10 speed dial numbers. The unit shall have an internal power supply that automatically adjusts between VAC of power input. Write a review.
CLEARONE XAP 400 PDF
ClearOne XAP 400 Datasheet
ClearOne XAP 400 Installation & Operation Manual